SPECIFICATION
Output:14.6V 50
AInput Voltage Range: AC180V~264V 50Hz~60Hz
Operating Temperature: -10ºC~45ºC
Storage Temperature: -40ºC~75ºC
Relative Humidity: 5%~95%
Atmospheric pressure: 70KPa~106KPa
Dimensions (mm): 260(L) × 175(W) × 90(H)
Net Weight: 4.5Kg
LED INDICATION
LED1 Red (power on);
LED2 Red (charging); Green (full).
USE INSTRUCTION
(1) Check if your local mains supply conforms to charger s input voltage 110V or 230V.Then connect the charger system to a wall socket strongly.
Warning: Do not connect to a wrong input voltage, or charger will be broken.
(2) LED1 RED confirms AC power on, and the LED2 GREEN confirms charger connects well.
Note: If the charger has a Power Switch at AC side please turn on it firstly
(3) Connect the plug or DC Output cord to battery terminals
LED2 light turns to RED, and if goes to GREEN, it confirms battery fully charged.(N Positive + ; L Negative - ; Brown +ve terminal, Blue -ve terminal).
Note: If this charger with a Relay for Reverse Polarity Protection, it doesn't have output voltage and current when charger power on but disconnecting with the battery. It will have voltage and current output when it connects with battery. If the charger don't have a Relay for Reverse Polarity Protection, it has output once the power on.